The Radiocommunications (Compliance Labelling – Devices) Notice 2014 (the RLN) is made under section 182 of the Radiocommunications Act 1992 (the Radiocommunications Act). It specifies the testing, labelling and record-keeping obligations on manufacturers and importers of specified radiocommunications products.
The RLN requires a supplier (a manufacturer, importer or their authorised agent) of specified radiocommunications products to apply a compliance label to a product to indicate whether the product complies with mandatory technical standards.
Before a supplier applies a compliance label to a product, the supplier must register on the national database as a ‘responsible supplier’.
Labelling is a fundamental element of the ACMA’s technical regulatory arrangements for radiocommunications products. Labelling indicates compliance with all applicable ACMA technical standards and associated record-keeping requirements.
Radiocommunications products that are subject to an applicable ACMA standard listed in Schedule 2 of the RLN must be labelled with a compliance label prior to the supply of those products to the Australian market.
A compliance label is a durable and legible label that indicates the product complies with the applicable regulatory arrangements, including any applicable ACMA standards. A compliance label must not be applied to the product unless it complies with the applicable ACMA technical standard/s and the supplier holds the documentation relevant to the product. If a product has a built-in display, the compliance label may be displayed electronically.
The compliance label for radiocommunications products is the Regulatory Compliance Mark (RCM).
Note: Products that were labelled with the C-Tick compliance mark prior to 1 March 2016 can continue to be supplied until labelled stock has been exhausted - they are not required to be re-labelled with the RCM.
A supplier must be registered on the national database to use the RCM.
Note: The Electrical Equipment Safety System (EESS), administered by the Electrical Regulatory Authorities Council (ERAC), also uses the RCM. The ACMA has no regulatory responsibility for the EESS arrangements. Information about the EESS is available from www.erac.gov.au/
Questions about the EESS should be directed to the ERAC Secretariat via email at email@example.com
Further information on the RCM, including a downloadable image, is available.
It is the responsibility of the supplier to ensure that a compliance label is correctly applied to each product before it is supplied to the market.
A supplier can give permission to a third-party, including an agent, to apply the label. However, ultimate responsibility for applying the label rests with the supplier.
Application of the compliance label
Physical requirements for the compliance label include:
Scale and visibility—the compliance label must be legible and visible to the unaided eye and the compliance mark must be no smaller than three millimetres (3 mm) in height. The label may be in any colour, provided that visibility is assured through either contrast with the background colour or marking in relief (for example, moulding or engraving).
Surface labelling—the compliance label should be a permanent feature placed on the product. It must be applied to a surface of the product that is easily accessible to the user. The label should be durable and applied by any suitable means including printing, painting, moulding, etching or engraving.
Electronic labelling—if a product has a built-in display, the compliance label may be displayed electronically rather than on the surface of the product. Electronic labelling is only permitted if the product has a built-in display—displays that connect to the product, but are external to it, are not considered to be built-in.
The labelling notices do not prescribe how electronic labels should be displayed. Examples of how electronic labels can be displayed include:
- during the device’s power up sequence
- under the device’s system information page
- under the device’s help menu.
The accompanying documentation must explain how the electronic label can be viewed.
Package labelling—if it is not practical to apply a label to the external surface of the product (and it is not displayed using a built-in electronic display), the label must be applied to both:
- the external surface of the packaging used for the product
- the documentation (operating instructions, warranty or guarantee certificates) that accompanies the product when it is supplied to the consumer.
A label applied to the external surface of the packaging must:
- be clearly visible
- occupy an area that is greater than one per cent of that external surface.
Note: A supplier who does not apply a label to the surface of the product is required to maintain records detailing the reasons why and where the label was subsequently applied. This requirement does not apply to a supplier who labels electronically.
Additional labelling requirements for a supplier of wireless audio transmitters
Section 9E of the RLN imposes an additional labelling requirement on a supplier of wireless audio transmitters.
A wireless audio transmitter includes wireless microphones, in-ear monitoring systems, public announcement systems and musical pick-ups.
From the 1 January 2015, the frequency band (694–820 MHz) is no longer authorised for use for wireless audio transmitters.
The RLN requires a supplier of a wireless audio transmitter to apply an additional label that contains a written statement informing the end user of the limitations on the use of the product that operate in the 694–820 MHz frequency band after 31 December 2014.
Further information on the supply of a wireless audio transmitter is available.
The RLN provides full details of the radiocommunications labelling requirements.
More information about the radiocommunications regulatory arrangements is available. If you have any questions about the regulatory arrangements, please contact the ACMA's Customer Service Centre on 1300 850 115 or email firstname.lastname@example.org