Australian Motorcycle Grand Prix at Phillip Island | ACMA

Australian Motorcycle Grand Prix at Phillip Island


The site locations provided in this document are provided by the organising committee for the particular significant event. Equipment connected or used or cabling installed at site locations not mentioned in the tables for a significant event ARE NOT COVERED BY THESE ARRANGEMENTS and must comply fully with the requirements of the relevant regulatory arrangements.

Australian Motorcycle Grand Prix Locations - Telecommunications

For the purposes of Clause 8 of Schedule 2 of Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001, the items are exempt from the labelling requirements in the following locations:

Column 1
Item
Column 2
State
Column 3
Venue name
Location *
Column 4
Address *
Column 5
Carrier *
Column 6
Remarks
(eg. commentary
box on level 3)

1

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Media Centre Level 1,
Pit Building,
Main Straight

Telstra

 

2

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Photographic Centre, Rear Pit Building,
Main Straight

Telstra

 

3

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Team Garages,
Ground Floor,
Pit Building,
Main Straight

Telstra

 

4

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Grand Prix Paddock, Rear Pit Building,
Main Straight

Telstra

 

5

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

TV Compound,
TV & Host
Broadcast Compound

Telstra

 

6

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Race Control, Level 3,
Race Control Tower,
Main Straight

Telstra

 

* Denotes mandatory fields

Additional Requirements

Where necessary, additional requirements will be determined to ensure the safe operation of equipment. Additional requirements are as follows:

  • no additional requirements

Australian Motorcycle Grand Prix Locations - Radiocommunications

For the purposes of the significant event exemptions in the radiocommunications standards, devices are exempt from these requirements only when operated in conjunction with this event and in the locations listed below:

Column 1
Item

Column 2
State

Column 3
Venue name
Location

Column 4
AMG66*
Co-ordinates
Zone, Easting, Northing

Column 5
RADCOM
Site I.D.

Column 6
Radius
km

1

VIC

Motor Race Circuit
Phillip Island

55 345800 5736800

150085

3 km

* Australian Map Grip 1966 (AMG66) Updated: 20/10/05

Additional Requirements

Where necessary, additional requirements will be determined to ensure the safe operation of equipment. Additional requirements are as follows:

  • no additional requirements

Australian Motorcycle Grand Prix Locations - Cabling

For the purposes of schedule 1 section 9 of the Telecommunications (Types of Cabling Work) Declaration 1997, cabling work that is not a type of cabling work for Division 9 of Part 21 of the Act and exempts the installation or maintenance of customer cabling in relation to broadcasting content at the following locations:

Column 1
Item

Column 2
State

Column 3
Venue name

Column 4
Address of Venue

1

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Media Centre, Level 1,
Pit Building, Main Straight

2

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Photographic Centre,
Rear Pit Building, Main Straight

3

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Team Garages, Ground Floor,
Pit Building, Main Straight

4

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Grand Prix Paddock,
Rear Pit Building, Main Straight

5

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

TV Compound,
TV & Host Broadcast Compound

6

VIC

Phillip Island Grand Prix Circuit
Back Beach Rd
Phillip Island

Race Control, Level 3,
Race Control Tower, Main Straight

View the ACMA's Telecommunications Cabling Provider Rules.

Additional Requirements

Where necessary, additional requirements will be determined to ensure the safe operation of equipment. Additional requirements are as follows:

  • no additional requirements
Back to top